# Millsap Water Well Drilling and Pump Service

> Water well drilling and 24/7 pump repair in Millsap and far-west Parker County, where wells shift into Cross Timbers rock. Local depths and yields. Call now.

URL: https://waterwelldrillingweatherford.com/areas/millsap/

Parker County · Upper Trinity GCD

Far-west Parker County sits where the Trinity sands give out and the Cross Timbers rock begins. Wells are often shallower here, and yield is the number to watch.

[Call a Well Tech Now](tel:+18173823840)

(817) 382-3840 · Open 24 hours, 7 days a week

— 200 ftmedian depth, new wells since 2021

— 160–240 ftmiddle half of wells

— 110new household wells within ~5 miles

Texas Water Development Board driller reports, January 2021 to September 2026.

## What Millsap well owners run into

### Shallow wells are common

Over a third of new household wells near Millsap since 2021 finished under 200 ft, the highest share of any town we cover.

### Yield can be modest

Cross Timbers water moves through fractures and sandstone lenses, so a well can produce well on one lot and just a few gallons a minute on the next.

### Two counties nearby

Most recent wells near Millsap are in Parker County, but about one in five is across the line in Palo Pinto County, outside the Upper Trinity district.

### Check the tract before you buy

New subdivisions where the Trinity is 60 ft thick or less need 5 acres from January 1, 2027. We check the district's map for your tract.

## Well services for Millsap

1. Most calls **Well Pump Repair.** No water, low pressure or a pump that won't shut off. We trace the fault from breaker to pump before anything comes out of the hole. [Well Pump Repair details](https://waterwelldrillingweatherford.com/services/well-pump-repair/)
2. New wells **Residential Well Drilling.** New household wells for Parker County acreage: siting, district registration, drilling, casing, grout and a pump sized to the hole. [Residential Well Drilling details](https://waterwelldrillingweatherford.com/services/residential-well-drilling/)
3. **Well Water Testing.** Bacteria, nitrate, iron, hardness, sulfide and methane screening for Parker County wells, with the sample drawn and handled the way the lab requires. [Well Water Testing details](https://waterwelldrillingweatherford.com/services/well-water-testing/)
4. **Livestock & Ranch Wells.** Stock-tank and pasture wells for cattle, horses and small ranches, sized to head count and summer demand. [Livestock & Ranch Wells details](https://waterwelldrillingweatherford.com/services/livestock-well-drilling/)
5. **Solar Well Pumps.** DC solar pumps for pastures without power, with a storage tank sized for cloudy days. [Solar Well Pumps details](https://waterwelldrillingweatherford.com/services/solar-well-pump/)
6. **Well Water Storage Tanks.** Storage tank and booster systems that let a low-yield well keep up with a household. [Well Water Storage Tanks details](https://waterwelldrillingweatherford.com/services/well-water-storage-tank/)

## Wells in Millsap: what the ground and the records say

Last updated September 29, 2026

[Water Well Drilling Weatherford](https://waterwelldrillingweatherford.com/) drills and services water wells in Millsap and the far-west corner of Parker County, where the ground under a lot changes the whole approach. Millsap began as a relay station on the stagecoach route from Weatherford to Palo Pinto, and was named for Fuller Millsap, who came to Parker County in 1856. When the Texas & Pacific Railway arrived in 1880, the town became a shipping point for area farms. Today its school district covers 124 square miles of west-central Parker County, and most homes outside town run on private wells.

This is where the Trinity aquifer thins out. The Upper Trinity district’s management plan describes the **Cross Timbers Aquifer**, older Pennsylvanian and Permian rocks, as a significant water source in western Parker County where the Trinity is absent. Water there moves through fractures and sandstone lenses rather than a thick, uniform sand. The state driller reports reflect it. New household wells within about five miles of Millsap since January 2021 have a median depth of **200 ft**, and **37% finished under 200 ft**, the highest share of shallow wells of any town we cover. In 2006–2010 the median was just 150 ft.

Shallow doesn’t always mean easy. On Cross Timbers ground, the question is less “how deep?” than “how much?” A well can hit good water in one sandstone lens and come up short a quarter mile away. We run a sustained yield test before choosing the pump. When a well can only sustain a few gallons a minute, we design around a [storage tank with a booster pump](https://waterwelldrillingweatherford.com/services/well-water-storage-tank/), not a bigger pump that would drain it.

About one in five recent wells near Millsap lies across the Palo Pinto County line, outside the Upper Trinity district. Parker-side wells register with the district before drilling. The district’s 2027 rule requiring 5 acres for new subdivisions where the Trinity is 60 ft thick or less is aimed squarely at country like this. The exact boundary is on the district’s tract-size map, and we check your tract against it before you buy.

For ranch and pasture use, many Millsap-area wells pair well with [solar pumps](https://waterwelldrillingweatherford.com/services/solar-well-pump/). Modest depths keep the lift low, and storage covers the herd overnight.

Neighborhoods we cover

- Millsap town
- Millsap ISD area
- FM 113 north and south
- Toward Mineral Wells

Landmarks

- Millsap ISD, serving a 124-square-mile district
- The old Texas & Pacific rail line
- Brazos River country to the south

How we reach you

Millsap is about 15 miles west of Weatherford and nine miles east of Mineral Wells, reached by I-20 and FM 113.

Main routes: FM 113 · I-20 · US 180 via Mineral Wells

## How a Millsap well call works

1. **Call and triage.** A person answers and asks what the gauge reads, whether the breaker has tripped and when water stopped. Some calls end right there with a reset that gets you through the night.
2. **Test at the wellhead.** We check voltage and amp draw, the pressure switch, tank pre-charge and, when needed, the static water level, so the diagnosis rests on readings instead of guesses.
3. **Written price, your call.** You get the fix, the price and the alternatives in writing before any pump comes out of the hole: repair the control, replace the pump, or both.
4. **Fix, disinfect, prove it.** After the work we run the system through full cycles, check pressure and flow, and chlorinate the well when it has been opened.

Millsap and neighboring service areas [Open in Google Maps](https://www.google.com/maps/search/?api=1&query=Millsap%2C%20TX)

## Guides for Millsap well owners

- [How Much Does Water Well Drilling Cost in Weatherford, TX?](https://waterwelldrillingweatherford.com/learn/water-well-drilling-cost-weatherford/) — Cost Guide
- [Do You Need a Permit to Drill a Water Well in Parker County?](https://waterwelldrillingweatherford.com/learn/parker-county-water-well-permit/) — Permit & Code
- [How Many Acres Do You Need for a Water Well in Parker County?](https://waterwelldrillingweatherford.com/learn/minimum-acreage-water-well-parker-county/) — Permit & Code
- [How Deep Are Water Wells in Parker County?](https://waterwelldrillingweatherford.com/learn/how-deep-are-water-wells-parker-county/) — Learn
- [What Are the Water Well Setback Requirements in Texas?](https://waterwelldrillingweatherford.com/learn/water-well-setback-requirements-texas/) — Permit & Code
- [Well Water vs City Water in Weatherford: Which Costs Less?](https://waterwelldrillingweatherford.com/learn/well-water-vs-city-water-weatherford/) — Decision Guide

## Millsap water well questions

**How deep are water wells in Millsap, TX?**

New household wells within about five miles of Millsap have a **median depth of 200 ft**, with the middle half between 160 and 240 ft. **37% finished under 200 ft.** That's based on 110 Texas Water Development Board driller reports since January 2021. There are too few water-level readings in the reports to quote a reliable typical level.

**How much does a new well cost in Millsap?**

At the 200-ft median, expect roughly **$8,500 to $14,000** for the drilled, cased well with pump, pressure tank and district fees (Parker side), plus **$2,000–$8,000** to trench and connect. If the well tests low-yield, add a [storage tank system](https://waterwelldrillingweatherford.com/services/well-water-storage-tank/).

**What is the Cross Timbers aquifer?**

It's the name the Texas Water Development Board gave, at the Upper Trinity district's request, to a group of older Pennsylvanian and Permian formations that supply water where the Trinity is absent. That includes western Parker County. Water sits in fractures and sandstone lenses rather than a continuous sand, so yields vary.

**Can a low-yield Millsap well still supply a house?**

Usually, yes. A well that makes just 3 gallons a minute produces about 4,300 gallons a day. The trick is a storage tank that fills slowly while a booster pump gives the house full pressure.

**Do you cover Millsap after hours?**

Yes. The phone is answered 24/7. We'll walk you through the breaker and gauge checks and send a tech when it can't wait.

Sources

- [Texas Water Development Board, Submitted Drillers Reports (2006–2026 extract)](https://www.twdb.texas.gov/groundwater/data/drillersdb.asp)
- [Upper Trinity GCD Groundwater Management Plan (2023), Cross Timbers aquifer](https://uppertrinitygcd.com/wp-content/uploads/2023/05/District-Management-Plan-Adopted-2-16-23.pdf)
- [Texas State Historical Association, Millsap, TX](https://www.tshaonline.org/handbook/entries/millsap-tx)

## Nearby: Mineral Wells, Brock, Peaster

[All service areas](https://waterwelldrillingweatherford.com/areas/)

- Palo Pinto and Parker counties **[Mineral Wells](https://waterwelldrillingweatherford.com/areas/mineral-wells/).** Cross Timbers bedrock instead of Trinity sand, with water in fractures and sandstone lenses. **200 ft** median well **185** new wells since 2021
- Parker County **[Brock](https://waterwelldrillingweatherford.com/areas/brock/).** Southwest Parker County growth: 600 new household wells nearby since 2021, and water standing about 35 ft lower than 15 years ago. **220 ft** median well **600** new wells since 2021
- Parker County **[Peaster](https://waterwelldrillingweatherford.com/areas/peaster/).** The busiest drilling area in the county: 924 new household wells within about 5 miles since 2021. **220 ft** median well **924** new wells since 2021

## Request a well visit in Millsap

New well, pump, tank or water quality: tell us what's going on at your Millsap property.

Faster by phone, any hour: [(817) 382-3840](tel:+18173823840)