A new household well around Weatherford, TX typically costs $12,000 to $25,000 all-in in 2026. That's roughly $10,000–$17,000 for a drilled, cased well with a submersible pump and pressure tank, plus $2,000–$8,000 to trench and connect it to the house. Depth sets most of the price: the median new well near Weatherford is 240 ft deep.
Water Well Drilling Weatherford put this water well drilling cost guide together because most online prices are national averages that don’t match Parker County ground. The figures below use Texas Water Development Board driller reports for the 590 household wells drilled within about six miles of Weatherford since January 2021, plus 2026 cost data for North Texas.
What a typical 240-ft Weatherford well costs, line by line
The median new household well near Weatherford is 240 ft deep, with water standing about 110 ft down and the pump set around 200 ft. Here is what that well costs:
| Line item | Typical 2026 cost | Notes |
|---|---|---|
| Drilling, casing, grout and cap | $7,200–$10,800 | 240 ft at $30–$45 per foot |
| Submersible pump, wire and drop pipe, installed | $1,500–$3,800 | Sized to the water level and household demand |
| Pressure tank, switch and fittings | $400–$1,500 | Tank sized so the pump runs at least a minute per start |
| Upper Trinity GCD registration | $600 + $100 deposit | Filed before drilling; deposit refunded after the completion report |
| Well, pump and tank subtotal | $9,800–$16,800 | |
| Trenching, water line and power to the house | $2,000–$8,000 | Depends mostly on distance and rock |
| All-in | about $12,000–$25,000 |
The drilling line includes the State Well Report the driller must file with the state and the district within 60 days of finishing the well.
Why depth moves the price more than anything else
Every foot is drilled, cased and grouted, so footage is the largest single line on the quote. Depth also changes the pump. Water standing 110 ft down near Weatherford lets the pump sit around 200 ft. Around Aledo, water stands closer to 176 ft and pumps go in near 280 ft, which adds pipe, wire and motor size.
State records show how much depth varies across the county. These are medians for new household wells since January 2021:
| Area (within ~5 miles) | Median depth | Middle half of wells | Water level |
|---|---|---|---|
| Weatherford | 240 ft | 200–340 ft | ~110 ft |
| Aledo | 320 ft | 252–360 ft | ~176 ft |
| Peaster | 220 ft | 200–240 ft | ~90 ft |
| Poolville | 215 ft | 200–220 ft | ~80 ft |
| Granbury (Hood County) | 360 ft | 200–420 ft | ~260 ft |
Across Parker County as a whole, the median is 240 ft over 4,746 wells. At the same per-foot rates, a typical 215-ft Poolville well and a typical 320-ft Aledo well differ by roughly $4,000–$5,000 before any hookup. See the cost to drill in Aledo or how deep wells run in each part of the county.
What pushes a quote up
- Hard drilling. In eastern Parker County the Trinity sands sit under Fredericksburg and Washita limestone, which drills slower than sand.
- A deeper pump set once the water level is measured, especially on wells over 300 ft.
- Distance to the house. Trenching runs about $5–$12 per foot in normal soil and more in rock, before pipe and wire.
- Water treatment. Iron, hardness or a rotten-egg smell (hydrogen sulfide) means a filter or softener. Budget after the lab test, not before. See well water filtration.
- Storage. A low-yield well, common in the Cross Timbers rock of far-west Parker County, may need a storage tank and booster pump.
Rules that can change the plan before the price
A well has to be legal before it gets priced. Today the Upper Trinity district requires at least 2 acres, 50 ft from property lines and 150 ft from other registered wells. Rules adopted on August 27, 2026 take effect January 1, 2027. New subdivisions in western Parker County, where the Trinity is 60 ft thick or less, will need 5 acres. District-wide, household-class wells move to 100 ft from property lines and 300 ft from other wells. On small lots that can rule out a site entirely. Read the permit steps and what the 2027 acreage rule means before you buy.
How to read a well quote
A complete quote should list:
- Drilled depth and price per foot.
- Casing type and diameter.
- Grout method.
- Pump brand, horsepower and setting depth.
- Tank size.
- District fees.
- Hookup distance.
- Whether a bacteria test and disinfection are included.
If a quote gives one lump sum, ask for the line items. It’s the only way to compare two drillers fairly. To test your own numbers, try the well cost calculator.
Bottom line
Budget $12,000 to $25,000 for a typical 240-ft Weatherford well connected to the house, and more on the east side toward Aledo, where wells run 320 ft and deeper. The drilling footage, the pump setting and the distance to the house decide where you land. A written quote should list all three separately.
Questions about your own well? Call (817) 382-3840. A person answers 24/7.
Sources
- Texas Water Development Board, Submitted Drillers Reports database (extract dated 2026-09-25)
- WellDrillingCosts.com, Texas well drilling cost by region (updated May 2026)
- HomeGuide, well pump replacement cost (2026)
- HomeGuide, trenching cost per foot (2026)
- Upper Trinity Groundwater Conservation District, forms and fees
- Wise County Messenger, district rules effective January 1, 2027