Skip to content

24/7 live answer

(817) 382-3840
Water Well Drilling Weatherford · TX

Parker County · Upper Trinity GCD

Water Well Drilling and Pump Repair in Brock, TX

Brock has been one of the county's fastest-drilling areas since it incorporated in 2017, and the records show water standing lower in new wells than it did 15 years ago.

(817) 382-3840 · Open 24 hours, 7 days a week

220 ftmedian depth, new wells since 2021

200–260 ftmiddle half of wells

125 fttypical depth to water

600new household wells within ~5 miles

Texas Water Development Board driller reports, January 2021 to September 2026.

What Brock well owners run into

Water standing lower

The median water level in new Brock-area wells went from about 90 ft in 2006–2010 to 125 ft in 2021–2026, about 35 ft deeper.

Six hundred new wells

Drillers filed 600 new household well reports within about five miles of Brock since 2021, up from 284 in 2016–2020.

Shallow wells feel it first

About a quarter of recent Brock wells finished under 200 ft. As levels drop, the shallowest pumps are the first to draw air in summer.

Growth on small acreage

New homes on smaller tracts mean tighter spacing between wells, just as the district's 2027 rules widen the required distances.

Well services for Brock

  1. Most calls

    Well Pump Repair

    No water, low pressure or a pump that won't shut off. We trace the fault from breaker to pump before anything comes out of the hole.

    Well Pump Repair details
  2. New wells

    Residential Well Drilling

    New household wells for Parker County acreage: siting, district registration, drilling, casing, grout and a pump sized to the hole.

    Residential Well Drilling details
  3. Well Pressure Tank Replacement

    Waterlogged tanks, short-cycling pumps and pressure that surges and drops. We size the tank to the pump so the motor stops wearing itself out.

    Well Pressure Tank Replacement details
  4. Water Well Inspection

    Pre-purchase well inspections for Parker County property: flow and pressure test, equipment condition, records check and a bacteria sample.

    Water Well Inspection details
  5. Well Water Storage Tanks

    Storage tank and booster systems that let a low-yield well keep up with a household.

    Well Water Storage Tanks details
  6. Well Deepening

    When the water level drops below the pump, we compare deepening the existing hole against drilling a new one.

    Well Deepening details

Wells in Brock: what the ground and the records say

Last updated

Water Well Drilling Weatherford drills and services water wells in Brock and southwest Parker County, one of the fastest-drilling parts of the county. Brock’s roots go back to 1871, when John Henry Brock bought land here, and to a gin and mill built at nearby Grissom Springs in 1880. The post office opened in 1888. Voters approved incorporation in 2016, and Brock became a town in May 2017. It sits on FM 1543 about 11 miles southwest of Weatherford, with the Brazos River country beyond it.

The state records show how quickly the area has filled in. Drillers filed 600 new household well reports within about five miles of Brock between January 2021 and September 2026, more than double the 284 filed in 2016–2020. Depths are moderate and consistent. The median is 220 ft, the middle half sit between 200 and 260 ft, and no recent well in the radius went 400 ft or deeper. About a quarter finished under 200 ft.

What stands out in Brock is the water level. Each well report records the static water level when the well is finished. Taken across hundreds of wells, the median level in new Brock-area wells has moved steadily down: about 90 ft in 2006–2010, 100 ft in 2011–2015, 114 ft in 2016–2020 and 125 ft in 2021–2026. That’s a trend across different wells, not a gauge on any single one. But it lines up with what the Upper Trinity district says about heavy pumping in the county. It also matters most to the shallowest wells, whose pumps have the least water above them in a dry August.

For new wells, the practical response is to set the pump with room below it for summer drawdown and to size the tank so the pump never short-cycles. For existing shallow wells that start to sputter, the options are lowering the pump, deepening or adding storage. We measure the actual water level before recommending any of them.

Spacing is the other Brock issue. Growth on smaller tracts means more wells closer together, and from January 1, 2027, household-class wells need 100 ft from property lines and 300 ft from other wells. If you’re buying a lot that still needs a well, we check the registered wells around it before you commit.

How a Brock well call works

  1. Call and triage

    A person answers and asks what the gauge reads, whether the breaker has tripped and when water stopped. Some calls end right there with a reset that gets you through the night.

  2. Test at the wellhead

    We check voltage and amp draw, the pressure switch, tank pre-charge and, when needed, the static water level, so the diagnosis rests on readings instead of guesses.

  3. Written price, your call

    You get the fix, the price and the alternatives in writing before any pump comes out of the hole: repair the control, replace the pump, or both.

  4. Fix, disinfect, prove it

    After the work we run the system through full cycles, check pressure and flow, and chlorinate the well when it has been opened.

Weatherford Aledo Springtown Azle Granbury Mineral Wells Peaster Millsap Poolville Brock Dashed ring: about 35 miles from Weatherford
Brock and neighboring service areas Open in Google Maps

Brock water well questions

How deep are water wells in Brock, TX?

New household wells within about five miles of Brock have a median depth of 220 ft, with the middle half between 200 and 260 ft, based on 600 Texas Water Development Board driller reports since January 2021. None went 400 ft or deeper, and about a quarter finished under 200 ft. Water typically stands about 125 ft down.

Are Brock water levels dropping?

The driller reports point that way. The median static water level recorded in new wells within about five miles of Brock went from about 90 ft in 2006–2010 to 100 ft in 2011–2015, 114 ft in 2016–2020 and 125 ft in 2021–2026. Each report is a single reading at completion, so this is a trend across many wells, not a measurement of any one well.

How much does a new well cost in Brock?

At the 220-ft median, expect roughly $9,000 to $15,000 for the drilled, cased well with pump, pressure tank and $700 in district fees, plus $2,000–$8,000 to trench and connect. Setting the pump with room below it for summer drawdown adds little now and saves a service call later.

My shallow Brock well sputters in summer. What are my options?

If there's water column left below the pump, lower the pump. If not, deepening the well or adding a storage tank so the well can recover between draws. We measure the water level before recommending either.

Do you cover Brock after hours?

Yes. The phone is answered 24/7, and Brock is a short run from our Weatherford base.

Sources

Nearby: Millsap, Aledo, Granbury

All service areas
  • Parker County

    Millsap

    Far-west Parker County, where wells shift from Trinity sand to Cross Timbers rock and 37% of new wells finish under 200 ft.

    200 ft median well 110 new wells since 2021

  • Parker County

    Aledo

    Some of the deepest wells in Parker County: a median of 320 ft, with water standing 176 ft down.

    320 ft median well 357 new wells since 2021

  • Hood County

    Granbury

    Hood County's deep wells: a 360-ft median, and 41% of new wells finish 400 ft or deeper.

    360 ft median well 157 new wells since 2021

No water in Brock? Call a well tech now.

Open 24 hours, 7 days a week. Prices in writing before work starts.

Request a well visit in Brock

New well, pump, tank or water quality: tell us what's going on at your Brock property.

Faster by phone, any hour: (817) 382-3840

We use your details only to call you back about this request. See our privacy notice.

(817) 382-3840 No water? A person answers 24/7